KELK PRODUCTS

Leading the industry with innovative solutions

CROP OPTIMIZATION
Perfect Crops Every time
Crop Optimization
In a Hot Strip Mill (HSM), the slab travelling between the roughing mill and the finishing mill is called a 'transfer bar'.

The irregularly shaped head and tail end of each transfer bar must be trimmed in a 'crop shear' in order to avoid cobbles when the transfer bar is rolled into a very long strip and subsequently coiled.

If too little of the head or tail is cropped the excess material may cause problems when rolled, such as cobbling of the entire bar, marked rolls, or a torn off tail that stays in the mill and cobbles the next bar. If too much is cropped the good material that is wasted may be worth several million dollars per year.

The process by which an ideal length of material is trimmed off the head and tail end of each transfer bar is called 'crop optimization'. Today an upgrade to a state-of-the-art crop optimization system is one of the highest payback improvements possible in a Hot Strip Mill.

Many suppliers offer crop optimization systems, using widely differing technologies and with scopes of supply ranging from extremely simple to extremely complicated. The difficulty of testing a crop optimization system on line makes it possible for all suppliers to make very optimistic promises of performance, but real results and actual savings have often been disappointing.

KELK makes it easy for a customer to confirm which competitive system is really best. There are four processes in crop optimization:

  • Imaging of the head and tail
  • Determination of the optimum cut lines
  • Tracking of the cut lines to the shear
  • Control of the shear blades in order to hit the cut lines exactly

There are errors associated with each of these processes which add together into an overall cropping accuracy figure. By using the most accurate components in the world for each process KELK engineers can guarantee, in writing, the best overall cropping accuracy for each application.

KELK Crop Optimization performance guarantees have never been equalled by any competitor, and have been met or exceeded 100% of the time.

The greatest savings reported by a KELK Crop Optimization user so far?...USD $18 MILLION PER YEAR!

Application Information

KELK Crop Optimization systems are available in three levels:

  • Imaging:
    The head and tail ends of each transfer bar are mapped but the rest of the optimization processes are performed by the host control system (*)
  • Open Loop Crop Optimization:
    Head and tail ends are imaged, cut lines determined and tracked to the shear, but control of the shear is handled by the host control system (*)
  • Closed Loop Crop Optimization:
    Imaging, tracking and shear control are all by KELK

(*Can be upgraded to a higher level in future).

For each application KELK application specialists will work with the customer to determine the level of Crop Optimization required, and the best location and mounting arrangement for each sensor. The scope of supply will include components such as the ACCUBAND Strip Width Gauge, the ACCUSPEED Laser Velocimeter, the KELK ACCUSCAN Hot Metal Detector, and the KELK ACCUCROP Crop Shear Controller. A complete documentation package including detailed installation drawings and a spreadsheet for calculation of guaranteed savings will be provided for customer consideration.

In the case of an upgrade to a KELK Crop Optimization system means can be provided to allow the end user to switch back and forth between old and KELK systems to demonstrate improvements realized.

Learn About Kelk

Over 60 years of KELK quality
and innovation

Recent Orders

Recent Information on our finalized
orders world-wide

Kelk Representatives

Meet our world-wide network of reliable
and committed representatives